- Guide Me
- Case Studies
£4.20 (Including VAT)
£3.50 (Excluding VAT) Price promise
Nylon Hammerfix 8mm x 60mm is for fixing MuteBoard™ 2 directly to brick and block work. Each pack comes with a set of 10 screws with both Nylon Sleeve and Screw (Zinc Plated). We recommend that 9 screws, evenly spaced are used with each instalment of MuteBoard™ 2.
Suitable Building Materials (please seek advice from a Structural Engineer in regard to weights)
We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!
A combination of the following will always result in a much improved acoustic performance.
If you're looking to soundproof an already existing home, 'future-proofing' or adhering to acoustic regulations, it is crucial to select the right system. Low frequencies are often the source of many issues and are not just found with industrial machinery or amplified music, but also in the human voice, in the use of soundbars or small Bluetooth speakers, and impact noises such as closing doors.
Nylon Hammerfix 8mm x 60mm is simply a mechanical fixing to securely fit MuteBoard™ 2 to a range of masonry, brick or block partitions. They offer no acoustic benefit, and their impact of the overall acoustic performance of creating holes in the wall is negligible, make sure to apply an acoustic sealant over the nail heads when completed.
We understand that it is not always possible to incorporate significant losses of space with say, the introduction of a stud frame, so we provide different variances to suit what performance you need, your budget and thickness.
Whatever scenario you have, come and speak to our team on 01937 588 226.
This product is part of the following systems:
A pilot hole must be drilled in to the wall first to allow the fitting of the Nylon casing, the screw is then fixed through the MuteBoard™ 2 and knocked in once there is little purchase left on the screw head to allow a tighter fit.
Nylon HammerFix 60mm is used for fixing our MuteBoard™ 2 into brick or block work.
It is not suitable for use with a timber or stud frame work, you will want to opt for a wood screw, all information is on our installation guides under Related PDFs for each product.