- Guide Me
- Case Studies
£59.95 (Excluding VAT)
£71.94 (Including VAT)
Paracol PUD4 Adhesive is used to bond the tongue and groove join of our Versafloor® 18mm to ensure an airtight seal and increased stability. This is a vital adhesive when creating a floating floor construction, one that uses little to no mechanical screws.
We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!
A combination of the following will always result in a much improved acoustic performance.
Versafloor® Adhesive is for use with Versafloor® 18mm, which is a cement particle board bonded together with chipboard to produce a solid and robust soundproofing platform. This adhesive will not improve acoustic performance, but will ensure the stability of the boards at their tongue-and-groove joints to create a successful floating floor And, it will also create an airtight seal. These properties attribute to both a strong performing separated system, with the reduction of air leakage, keeping in check the first two properties above.
Whatever your soundproofing needs, come and speak to our team on 01937 588 226.
This product is part of the following systems:
We recommend the use of Versafloor® adhesive as it rules out any compatibility issues, any alternative would likely want to be tested to ensure it’s safely bonded together. Versafloor® is a cementitious particle board, so a blend of chipboard and cement impregnated together for a dense finish.
Our guidance is 1 tub per 25 boards, applied to each tongue and groove section - this can vary between installers depending on how generous they are with applying adhesives.