GenieClip® LB2

£7.64 (Including VAT)
£6.37 (Excluding VAT) Price promise

1 - 49: £6.37
50 - 99: £6.18
100 - 199: £6.05
200+: £5.93

GenieClip® LB2 is a part of the innovative GenieClip® System for Soundproofing Ceilings, helping to accommodate varying ceiling heights with no compromise in acoustic performance.

GenieClip® LB2 is a component of the innovative GenieClip® System, designed to attenuate high levels of Airborne noise as well as to control Impact noise, suitable for retro-fits and new builds alike at an affordable price. LB2 is most commonly used where there are alternating ceiling heights that help to reduce the requirement for joist levelling and to accommodate any servicing such as pipe work that may run slightly under joist.

How to Soundproof a Ceiling

When soundproofing a ceiling, you will want to increase to mass per m2 to notice a reduction in airborne noise as well as creating seperation where impact noise is concerned, this is achieved with the GenieClip® System.

If you are uncertain of what to look for when soundproofing a wall or ceiling, you can read our handy guides - A Guide to Soundproofing a Wall or A Guide to Soundproofing a Ceiling by clicking on the icons below.


A Guide to Soundproofing a Ceiling



GenieClip® LB2 Information

  • 101mm x 63mm x 66mm (with bracket)
  • Helps to accomodate varying joist heights and uneveness without the need for additional labour in joist levelling
  • Uni-body moulded rubber and galavanised steel including bracket
  • Helps to de-couple ceiling from timber joist
  • Low Frequency isolation
  • Significant improvement over standard resilient bars in both performance and fitting (you can view our blog in resilient channels by clicking here)

GenieClip® LB2 Ceiling Installation


With a ceiling configuration, we would recommend removal of existing ceiling for a secure fit into the side of the joist - please make sure there is atleast 100mm of clearance to apply the bracket.

Recommended Centre for GenieClip® on Timber Joist (ceiling)
GenieClip® CentresFurring Channel Centres
0.4m (hitting each joist)0.6m

*Standard joist centres of 0.4 centres

EAN number5060484200117
Weight100 g
Length101.6 mm
Width63.5 mm
Height66.68 mm
Fire ratingTemperature Stability: -40°C to +115°C (-40°F to +240°F)

This product is part of the following systems: