Carpet Gripper Strip 10m Self Adhesive

£23.94 (Including VAT)
£19.95 (Excluding VAT) Price promise



  • Dimensions: 10m x 30mm x 5mm.
  • Weight: 100g
  • For: homes, workplaces, industrial developments, and specialist audio environments.
  • Installation: to be used with our MuteMat  range, please see our 'Install' tab below.
  • Where: used around the perimeter of out MuteMat materials to raise the Carpet Grippers to an appropriate height. Gripper Rods not included.


Carpet Gripper Strip (Self-Adhesive) is used under carpet gripper rods under gripper rods to raise them to the correct height. Each one comes with a Self-Adhesive backing that can be applied to most sub-floor materials for a quick and easy installation.

These are essential for use with our MuteMat range, this is because their heights are found above 10mm, and this will leave a dip around the perimeter of the room when you are installing the Gripper Rod directly to the floor. Their installation is purely aesthetical, and to level the flooring.

 

  • 5mm x 30mm x 10m.
  • For raising Gripper Rods to an appropriate height, helping to avoid dips around the perimeter.
  • Self-adhesive backing for a straightforward install.
  • Does NOT include the gripper rod, these will need to be sourced independently.
EAN number5060484200568
Weight1130 g
Length10000 mm
Width30 mm
Height5 mm

We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!

How to soundproof floors

A combination of the following will always result in a much improved acoustic performance.

  • Mass: the addition of more substantial materials to reduce sound energy, for example, added layers combined with soundproof plasterboard.
  • Separation: breaking contact with the surface or surfaces through the use of acoustic isolation clips or stud framing.
  • Damping: the reduction of vibration through the use of flexible, damping materials such as Tecsound.

 

Carpet Gripper Strips are a part of our MuteMatrange, and although they do not offer a soundproofing purpose, their role in the system is still important. When you are installing a Woven Carpet there will need to be Gripper Rods fitted to hold it in place. The Carpet Gripper Strip acts as a riser, to lift the grippers to the appropriate height. It does offer a small buffer from the grippers as they are only to be tacked into the Gripper Strip itself, not into the flooring, but its acoustic performance is negligible.

 

Learn more about what you need, and how to approach soundproofing floors below

 


Whatever your needs, come and speak to our team on 01937 588 226.

  • Make sure to peel the paper covering off to expose the self-adhesive face, be careful not to pull off this self-adhesive in the process.
     
  • Carpet Gripper Strip must be installed on to a clean surface, one that is debris and oil free, so that it remains in place.
     
  • Gripper Rods to be tack-nailed into the Carpet Stripper Strip to hold it in place.