- Guide Me
- Case Studies
£7.95 (Excluding VAT)
£9.54 (Including VAT)
Spray Contact Adhesive is a multi-purpose contact adhesive which is suitable with a variety of our products to help provide a tack bond for Mass Loaded Vinyl and rubber surface finishes to timber.
Although adhesives do not directly improve the soundproofing performance, it does prevent the bowing of timber that could cause a 'slapping' effect on the flooring. It also prevents any movement in the flooring that could lead to cracking of fragile joins in timber finishes on the tongue-and-groove fitting and tearing of any vinyl.
We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!
A combination of the following will always result in a much improved acoustic performance.
Spray Contact Adhesive is our timber adhesive for the tacking of MuteMat™ and MuteBarrier™ range. Although adhesive does not provide any immediate soundproofing benefit, its role in the system is still important. When you install a wooden flooring for example or composite flooring, made up of many layers, moisture over time will begin to warp the flooring. When the flooring warps it lends itself to 'slapping' against the flooring, causing a form of impact noise that is difficult to reduce without replacing.
Whatever your soundproofing needs, come and speak to our team on 01937 588 226.
Spray Contact Adhesive can be used with all MuteMat products to tack materials to timber. Make sure the can is well shaken before use. Turn the nozzle to increase or decrease the width of the spray and spray 6-8 inches (15-20 cm) away onto the surface. The surfaces to should be clean and free from dust, grease and other contaminants.
Depending on the amount applied and the product being applied to it, the bond can vary - any area with excessive moisture and cold environments can drastically affect the bond and cure time.