Styccobond F3

£70.80 (Including VAT)
£59.00 (Excluding VAT) Price promise



  • Covers: up to 45m2 with a 2mm x 6mm trowel
  • Weight: 15kg.
  • For: homes, workplaces, industrial developments, and specialist audio environments.
  • Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*
  • Installation: to be used with all over screed adhesive applications please see our 'Install' tab below.

 


Styccobond F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable to use over normal underfloor heating installations.

Styccobond F3 is used in conjunction with our MuteMat® OSF range when adhering to absorbent substrates.

If anhydrite screed has been laid, the laitance must be cleared before applying any adhesive.

Styccobond F3  can also be used to adhere woven carpets to MuteMat® OSF.

  • 15L tub, coverage estimate of 45m2 using a 2mm x 6mm notch trowel
  • Suitable for use with MuteMat® OSF
  • Suitable for use over normal underfloor heating installations
  • High strength

 

Please refer to F.Ball and Co. LTD literature for full adhesive information.

Weight15 kg

We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!

How to soundproof floors

A combination of the following will always result in a much improved acoustic performance.

  • Mass: the addition of more substantial materials to reduce sound energy, for example, added layers combined with soundproof plasterboard.
  • Separation: breaking contact with the surface or surfaces through the use of acoustic isolation clips or stud framing.
  • Damping: the reduction of vibration through the use of flexible, damping materials such as Tecsound.

 

Styccobond F3 adhesive for installation of our MuteMat® OSF range to absorbent substrates, and although adhesive does not provide any immediate soundproofing benefit, its role in the system is still important. When you install a wooden flooring for example or composite flooring, made up of many layers, moisture over time will begin to warp the flooring. When the flooring warps it lends itself to 'slapping' against the flooring, causing a form of impact noise that is difficult to reduce without replacing. Adhesive helps to reduce this warping and to keep all composite levels in-check and to satisfy Building Control requirements.

 

Learn more about what you need, and how to approach soundproofing floors below

 


Whatever your soundproofing needs are, come and speak to our team on 01937 588 226.

 

 

Soundproofing products act as a barrier to decrease sound leaving or entering a room or workspace. Sound absorbers absorb the sound within a room and assist to reduce room reverberation etc. Absorbers do not prevent the sound leaving the space but will reduce it. If you are wanting to soundproof a room you would have to buy soundproofing products. It may also be worthwhile to think about some absorbers inside the room to help reduce the sound before it hits the soundproofing.

A sound barrier is a sound blocker and usually includes insulation with a high mass, which then reduces the amount of sound that can pass through it. A standard domestic door is a good example of a noise barrier when it is closed as it reduces the sound of external noise. Sound waves flow like water and air so it is impracticable to use a sound barrier such as a fence or screen to stop noise but they are effective when used to reduce noise immediately on the other side of them. From distances farther away the noise reduction will be less efficient.