MuteClip® LP

£6.95 (Excluding VAT) Price promise
£8.34 (Including VAT)

  • Performance: rated at 60dB for airborne, and at 35dB for impact transmission*.
  • Thickness: MuteClip® LP offers a low profile, so this will alter depending on which system you choose.
  • For: homes, workplaces and industrial environments.
  • Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for airborne and impact transmission.
  • Installation: four fixings require per MuteClip®, you find additional installation information below.
  • Where: ceiling installation to metal and timber frames.
  • A significant improvement over standard resilient bars in both performance and fitting you can view our blog in resilient channels here.

MuteClip® (Patent GB2580959) LP (Low Profile) is our sound isolation clip that is unique in its design with its dual density rubber polymers, each carefully designed and assembled to improve noise reduction over a broad range of frequencies while remaining stable and consistent with every MuteClip® LP. The adopted low profile helps to reduce the loss of room height while maintaining the same performance as the standard MuteClip®, it is installed into the side of the joist so that it is only partially the depth of the MuteClip® Channel that protrudes. The MuteClip® LP systems look to minimise the points of contact with the joists while creating a system that is easy to install with little to no error due to the accomplished design. With these properties working in tandem, you will achieve excellent soundproofing against impact and airborne noise on a whole host of projects, all completed with swiftness and efficiency at an affordable price.




In scenarios where there is varying joist heights or two pre-existing rooms that have two different head heights, we would recommend the use of our MuteClip® XP (Extended Profile).


  • Dual density rubber acoustic clip.
  • Low profile design to reduce the loss of room height.
  • Dramatically reduces airborne and impact noise as a high performing, slimline acoustic system.
  • Can be used on metal, wooden, brick and concrete structures.
  • Reduced points of contact to help de-couple ceiling and wall systems.
  • Significantly improves sounds control in both high and low frequencies.
  • A significant improvement over standard resilient bars in both performance and fitting (you can view our blog in resilient channels by clicking here).
  • Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for impact transmission.

To achieve the best possible solution in soundproofing, you will need to incorporate them into acoustic systems, and it is under our 'Systems' tab above you will find MuteClip® in a range of options. These offer ways of increasing acoustic performance by fitting them to decoupled stud frames, internal stud frames to split multiple rooms, or when you need to be conservative with space - directly installing them to your brick/block wall or joist ceiling.






MuteClip® LP is part of iKoustic's MuteRange core - these are products that been subjected to stringent testing in both laboratory and real-world environments providing the best possible solution for the purpose with a result you can trust.


You can find out more about our all-encompassing MuteRange by clicking on the icons below or get in contact with iKoustic today.




*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our 'Featured Systems' tab.

We endeavour to display the most up to date testing and assist in managing your expectations through each stage of the process so that the choice we make is the right one.

Weight174 g
Length105 mm
Width50 mm
Height74 mm

We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, to name a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team, we are here to help!


How to soundproof ceilings

A combination of the following will always result in the best acoustic performance possible.

  • Mass: the addition of more substantial materials to reduce sound energy, for example, added layers of acoustic barrier combined with soundproof plasterboard.
  • Separation: breaking contact with the surface or surfaces through the use of acoustic isolation clips or stud framing.
  • Damping: the reduction of vibration through the use of flexible, damping materials such as Tecsound.

MuteClip® LP is the principal component of all MuteClip® LP Systems and is what provides separation by decoupling from timber joists to both metal and timber frames. It breaks contact with these building elements and creates an air gap, each MuteClip® LP system gives a significant improvement over directly fitted systems, for example, fitting acoustic plasterboard to the surface. When low-frequency airborne noise and impact noise is present, it is necessary to decouple from the structure so that the vibrations have a greater variety of materials for the soundwaves to travel through. Since our MuteClip® LP solutions are designed for different purposes, each will be tailored to the level of noise you are receiving or expecting from adjacent rooms, and to what level you want to reduce them. Mass and Damping properties are dealt with in the 'barrier' of each system. Our 'Double Plus' solutions feature the dense SoundPlank 19mm, Tecsound (a damping membrane) and Acoustic Plasterboard 15mm, and by sandwiching Tecsound between the layers, a damping effect is provided between them - increasing performance.


We understand that it is not always possible to incorporate significant losses of space with say, the introduction of a stud frame, so we provide many options that can be applied directly to partitions, to help suit your desired performance, cost and thickness.


Guides to soundproofing ceilings



Ready to see how  MuteClip® LP will benefit your project? Select our 'Systems' tab to review acoustic performance, overall system depths and add all featured components to the cart in a press of a button.

No matter the complexity of your project, come and speak to our team on 01937 588 226 so we can help!

MuteClip® LP Ceiling Installation

With a ceiling configuration, we would recommend removal of the existing ceiling for a secure fit into the side of the joists.

Recommended Centre for MuteClip® on Timber Truss (ceiling)
MuteClip® CentresMuteClip® Channel Centres
0.4m (hitting each joist)0.4m

*Standard joist centres of 0.4 centres

MuteClip® LP is our low profile (LP) option that allows each clip to be installed on a ceiling to the side of the joist so that the MuteClip® Channel will run on the inside and parallel to the joist, and this makes it a perfect option for sound proofing rooms with limited ceiling height. It is applicable for home sound proofing where impact and airborne noise from noisy neighbours above is intrusive, as well as soundproofing recording studios, cinema rooms and other environments that generate excessive noise. You can find all systems MuteClip® LP is featured in by clicking on the systems tab next to the FAQs here.

You cannot install MuteClip® LP on to walls, nor any stud wall framework as the MuteClip® Channel would need to be vertically installed which would lead to a slight drift towards to floor increasing the level of contact and reducing the effectiveness of the sound proofing - it must only be used as a ceiling soundproofing option. If you are looking for our wall soundproofing MuteClip®, click here.

16kg per MuteClip® LP is the maximum load you can apply to each clip, and our team can help to advise you on the weights. We aim to be no more than 75% capacity of the clip as hitting the maximum reduces the suspension of the MuteClip® LP, and with any other noise insulation clip too, reducing its soundproofing effectiveness.

This all depends on which system the MuteClip® LP is incorporated in to and what is currently in place, for example a concrete ceiling will offer a reliable support for sound proofing against airborne noise but will present issues with impact noise, whereas a joist ceiling will perform differently and would require Acoustic Mineral Wool between joists. Other notable areas that can also affect acoustic performance is any adjacent cavities or stud framing lacking sound insulation, the noise will always move to the next weakest area and can travel into these areas by way of flanking transmission. We offer estimations of acoustic performance in our acoustic results, but it is important to note that every property will behave differently. You can find all systems MuteClip® LP is featured in by clicking on the systems tab next to the FAQs. There is no compromise in performance or additional performance with the use of the Low Profile compared to the standard MuteClip®, and its use is for concerns of loss of head height in each room.

Each colour represents a different density, and these react differently to vibration and intensity of sound which helps to cover a broader range of frequencies in sound proofing.

MuteClip® LP requires more fixing points than the standard MuteClip® because of the way it is designed and how it suspends its weight on the bracket. The levelling process requires a little more experience in DIY and dry lining, and previous use with drills and a little knowledge of installing materials on to ceilings (so that no servicing or plumbing is fixed in to). When it comes to the Acoustic Plasterboard stage in systems, again, some experience in dry-lining will go a long way to ensure significant gaps and incorrect cutting are minimised as these can affect the result of the sound proofing. Two or more people are required due to the high mass of materials.

Fixings are not provided with Mute Clip® LP, and you will need to source these from a local fixings merchant - you can find out more about installation and guidance of fixings in the Related PDF tab.

We offer a range of trade discounts that are dependent on frequency and or value of orders alongside our service and guidance for every project. We ask that a few orders are placed prior if you have placed orders with us or have a few projects looking to specify MuteClip® LP, do get in contact with us to see how we can help you best.

Download your files here

In order to download these files please input the information below: