MuteClip® Stud Single | Concrete Ceiling Soundproofing

A slim and effective solution to gain high levels of protection against impact noise, as well as airborne noise. Used where impact noises are the biggest issue around footsteps and general vibration

  • Airborne: 60dB*
  • Impact: 42dB*
  • 55mm (excluding stud frame)
Add System Components To Cart

MuteClip® (Patent Pending) Stud Single is perfect for projects that require an effective solution for ceiling soundproofing in concrete builds, one that increases acoustic performance for both airborne and impact noise. Its performance comes from a combination of both the separated stud framework that creates lesser points of contact with concrete soffit ceiling and using our MuteClip® which is composed of a dual-density rubber in a galvanised metal case that performs like a shock absorber, and this is attached to the new frame. The MuteClip® Channel affixes to the MuteClip® and the new soundproof ceiling which is composed of a single layer of Acoustic Plasterboard 15mm suspend away from the concrete slab. What this results in is an improved reduction of airborne noise, especially in the more problematic lower to middle-lower frequencies, as well as reduction of impact noise and other forms of vibration, which are often problematic in concrete constructions.



  • Easy to install, no incorrect fixing or shortages, unlike standard Resilient Channel.
  • System thickness from stud frame 55mm
  • 60dB* for airborne (where a higher number is desired) (details are available on the 'System Performance' tab above).
  • 42dB* for impact (where a lower number is desired) (details are available on the 'System Performance' tab above).
  • 10-15dB estimated improvement for airborne noise and 10-15dB estimated improvement for impact noise* (where 10dB is a 50% reduction as perceived sound loudness).
  • Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for airborne and impact transmission. (Details are available on the 'System Performance' tab above).



This systems performance can be further increased to achieve additional reductions in sound and vibration transmission, please ask a member of staff about these options if you require additional system performance.


MuteClip® Concrete Stud Single is available for specification on a wide range of projects that include large scale residential builds, commercial properties for increased privacy and perfect for homes. This system is also suitable as a retrofit for those looking to improve existing properties.

Projects where you are specifying the use of an acoustic system our team can help you from start to finish and with the use of our MuteClip® Concrete Stud Single. We can provide Acoustic Modelling Data for estimating results, CAD drawings of the MuteClip® and Channel to aid visualisations, and fantastic rates so that you feel you're making the right choice. We also provide Acoustic Testing for existing structures as well as Part E Building Regulation testing and additional acoustic testing options for projects that include Gyms and Nightclubs or even homes that require or seek increased acoustic performance for improved living quality.


MuteClip® Concrete Stud Single contains components from our MuteRange core - these are products that have been subjected to stringent testing in both laboratory and real-world environments providing the best possible solution for the purpose with a result you can trust.


You can find out more about our all-encompassing MuteRange by clicking on the icons below or get in contact with iKoustic today.



MuteClip®  System vs Resilient Channels

We have provided a detailed blog on the use of our MuteClip® System against the 'Additional Costs of Resilient Channel.' 

"To make you aware of the potential issues and additional costs Resilient Channel can leave within the project, we have provided some brief points to review before proceeding with this method."


A Guide to Soundproofing a Ceiling

If you are uncertain of what to look for when soundproofing a ceiling you can read our handy guide - A Guide to Soundproofing a Ceiling by clicking on the icon below. You can also pick up the phone and say hello to find out how we can help you on - 01937 588 226!



Are you prepared?

  • Conduct prior sound testing or home testing to draw attention to any potential flanking paths (where sound takes an alternative route), and this will be an essential part of making sure you have the best soundproofing in place and managing what is possible to achieve, our team can help guide you on this.
  • You will need to make sure you are fixing MuteClip®  direct into the stud work without any obstruction
  • To lay Acoustic Mineral Wool between any adjacent stud framing or cavity walls to help reduce flanking transmission

How to install.

Installation is based on a standard 400mm joist spacing, and we recommend staggering the MuteClip®  at 400mm in a grid configuration with a MuteClip at each end. MuteClip® Channels would also installed with a 600mm spacing with one located 100mm from top and bottom

  • If the framework is not installed, this would require fixture with Isolation Strips to maintain maximum separation where possible.
  • MuteClip® is fixed to the bottom of the framework.
  • 200mm overlap on MuteClip® Channel with four self-tapping screws into the shoulders of the MuteClip® Channel.
  • Rockwool RW3 between the framework.
  • A layer of Acoustic Plasterboard fixed on to MuteClip®  Channel with self-tapping screw (leaving a 2-5mm gap from any adjacent surfaces and using acoustic sealant).


Alternatively, we provide Acoustic Installation across the UK to fit all of our systems - they come with a wealth of experience in the field so you can feel comfortable that the right installation methods are being carried out.


Contact us | 01937 588 226


All of our systems contain a high level of mass. If there are any structural concerns, you will want to consult a Structural Engineer to discuss your requirements.

*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this.

*Our guide price includes all materials and ancillaries required

We endeavour to display the most up to date testing and to manage expectation as best as possible; please do contact us to discuss your requirements.

Noise Reduction Guidance*

  • Muffled conversation and other everyday household noises
  • Impact noise issues and vibration

Compliance with Part E Building Regulations and Scottish Building Regulations

  • When installed under the correct guidance this system is compliant with the required acoustic values for airborne transmission featured in Part E Building Regulations; these are applicable across the UK, excluding Scotland (England, Wales, Northern Ireland) and the Republic of Ireland. We would advise conducting a Sound Test to survey any planned conversions in existing properties before concluding on an Acoustic System.
  • Regarding Scottish Building Regulations we would advise conducting a Sound Test to survey any planned conversions in existing properties before concluding on this Acoustic System as they contain higher targets than that of Part E, our Legal Requirements section has the required acoustic values.

  • For additional guidelines and requirements for non-residential buildings; for example, Gyms, Nightclubs and Industrial focused purposes, please do contact us so we can discuss your available options.

Where concrete structures are best performing in terms of sound insulation is the airborne noise, its mass is usually sufficient in reducing a wide range of noise issues to a non-intrusive level, but not always. Impact noise is problematic in concrete constructions and requires separation to see high levels of acoustic performance, separation is also necessary to when low-frequency airborne noise is present. MuteClip® Concrete Stud Single is fitted to a new stud frame in the majority of cases, one that is isolated from the concrete substrate above to break the contact of MuteClip® and Channels. Without taking flanking noise issues into account, something that can be in abundance in adjacent walls through direct contact, we would expect a 5-10dB improvement for airborne and 8-10dB for impact noise, 25-50% and 40-50% respectively reduction as a guide to common household noise issues. Excessive noise issues where music, cinema rooms and other such noises would require a more robust ceiling soundproofing system installing.

Yes it will, the separation provided by the separated stud frame helps to break contact for vibration to transfer, and the MuteClip® and Channel are creating a further suspension for any sound issues still reaching past the framework. Impact noise issues are reduced significantly; these are the sounds of footsteps, dropping of objects and also the dragging of furniture. The single layer could work as a functional trial if you decide that space needs to be lost for a further reduction by upgrading to our MuteClip® Concrete Stud Double to tackle noise issues that revolve around intrusive noises from televisions and audio focused activities from stereo systems etc.

With new build concrete structures, it is more often than not that the mass per cubic meter is significant enough to meet airborne noise requirements, and often requires only impact noise insulation. There are occasions where regulations have not been met to where MuteClip® Stud Single would likely suffice, but building control would need to consider fire regulations and this system’s suitability. In conversion projects, the same applies concerning fire regulations, but a mass of concrete may not be up to current building regulations and will require perhaps something more robust - we would advise to carry out an acoustic test of both airborne and impact in existing structures to survey what would be appropriate. Adequate soundproofing would need to be applied to adjacent surfaces to prevent Flanking Transmission affecting the acoustic testing.

In the process of installing Resilient Channels, there can be several errors made in which can have a detrimental impact on the acoustic performance of an overall system. If the plasterboard layer is over tightened and breaches the wall, the channel will become crushed or bent, and the soundproofing qualities are now lost. MuteClip® is designed for a single fixing per clip, and the Channel is snapped into place - removing potential errors made during the installation. The reduction of low-end frequencies is superior with the MuteClip® and Channel systems, essential for the reduction of impact noise.

In the majority of cases, we would recommend removing the existing stud frame battening with the addition of substantial weight - on the odd occasion we can look to add the use of acoustic hangers to assist in providing extra support per square meter. If you want to use the existing frame, have it checked by specialist joinery or acoustic installation personnel prior. If a robust timber frame has been installed, it is likely we could use this - but we would follow the same process as above and have it reviewed.

When solid surfaces are in contact with one another they transmit vibrations, so if a soundproofing ceiling system is abutted tightly up to the adjacent walls, any vibrations through Flanking Transmission will now be found moving back through in to what was supposed to be the suspended ceiling, short-circuiting the MuteClip® and Channel and degrading the acoustic performance. It will also limit the ceiling’s suspension and reaction to any impact noise, again dampening its performance.

This will all depend on the thickness of stud frame, in which generally a 100mm thickness is recommended to support weights, with a gap from framework usually suspended at 10mm as a minimum but often more realistically to deal with any fluctuations in the ceiling and the 41mm suspension gap between MuteClip® and Channel, 150mm would be suitable for this installation. Do not use thicker sizes to compress more material in; this will harm the acoustic performance by re-establishing a connection between the concrete substrate and Acoustic Plasterboard - degrading the performance.

All existing plasterboard and frameworks that are inadequate must be removed before installation to allow a secure fitting, and it can also help to uncover any potential issues that may affect the acoustic performance or fitting - especially in properties that are being converted where old decorative features could be challenging to work around. Cornice, coving and any other decorations will require removal either prior or during the installation price - we would quote for such removal if you require all done in one process, and electronics will need extending to the new depths by a Part P Registered electrician and made safe for our team to pull through the new insert hole.

Download your files here

In order to download these files please input the information below: