The slimmest joist ceiling option in our MuteClip® range that helps to tackle both airborne and impact noise with no compromise in its soundproofing performance. Minimal loss of room height.
MuteClip® (Patent Pending) LP Single is our slimmest option for projects that require a ceiling soundproofing solution that performs to a high standard and reduces head height loss without the compromise of acoustic performance. It creates lesser points of contact with the joist ceiling using our MuteClip® LP which is composed of a dual-density rubber in a galvanised metal case that performs like a shock absorber and this bolts to a bracket that allows both MuteClip® and Channel to nest into the joist. The MuteClip® Channel affixes to the MuteClip® LP and the new soundproof ceiling which is composed of a single layer of dense Acoustic Plasterboard 15mm suspend away from the ceiling joists. What this ultimately results in is an improved reduction of airborne noise, especially in the more problematic lower to middle-lower frequencies, as well as reducing impact noise and other forms of light vibration.
MuteClip® LP Single is available for specification on a wide range of projects that include large scale residential builds, commercial properties for increased privacy and perfect for soundproofing the home. This system is also suitable as a retrofit for those looking to improve existing properties.
Projects where you are specifying the use of an acoustic system our team can help you from start to finish and with the use of our MuteClip® LP Double Plus. We can provide Acoustic Modelling Data for estimating results, CAD drawings of the MuteClip® LP and Channel to aid visualisations, and fantastic rates so that you feel you're making the right choice. We also provide Acoustic Testing for existing structures as well as Part E Building Regulation testing and additional acoustic testing options for projects that include: Gyms and Nightclubs or even homes that require or seek increased acoustic performance for improved living quality.
MuteClip® LP Single contains components from our MuteRange core - these are products that have been subjected to stringent testing in both laboratory and real-world environments providing the best possible solution for the purpose with a result you can trust.
You can find out more about our all-encompassing MuteRange by clicking on the icons below or get in contact with iKoustic today.
We have provided a detailed blog on the use of our MuteClip®™ System against the 'Additional Costs of Resilient Channel.'
"To make you aware of the potential issues and additional costs Resilient Channel can leave within the project, we have provided some brief points to review before proceeding with this method."
If you are uncertain of what to look for when soundproofing a ceiling you can read our handy guide - A Guide to Soundproofing a Ceiling by clicking on the icon below. You can also pick up the phone and say hello to find out how we can help you.
Installation is based on a standard 400mm joist spacing, and we recommend staggering the MuteClip® at 400mm in a grid configuration with a MuteClip® at each end. MuteClip® Channels would also installed with a 600mm spacing with one located 100mm from top and bottom
Alternatively, we provide Acoustic Installation across the UK to fit all of our systems - they come with a wealth of experience in the field so you can feel comfortable that the right installation methods are being carried out.
Contact us | 01937 588 226
All of our systems contain a high level of mass, and if there are any structural concerns, you will want to consult a Structural Engineer to discuss your requirements.
*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this.
We endeavour to display the most up to date testing and to manage expectation as best as possible; please do contact us to discuss your requirements
Regarding Scottish Building Regulations we would advise conducting a Sound Test to survey any planned conversions in existing properties before concluding on this Acoustic System as they contain higher targets than that of Part E, our Legal Requirements section has the required acoustic values.
For additional guidelines and requirements for non-residential buildings; for example, Gyms, Nightclubs and Industrial focused purposes, please do contact us so we can discuss your available options.
The MuteClip® LP or Low Profile is attached to the side of the joist instead of on the bottom as does the standard Mute Clip™. What this means is that it can be placed to the desired level of where you would like your new ceiling, with the Channel sitting only slightly below the joist, this then allows for the Acoustic Plasterboard to be fitted. The ceiling still has the same level of suspension and isolation as any other standard MuteClip® options, and acoustic performance across both airborne and impact noise are not affected in any way. You will need to make sure there is isolation between the acoustic plasterboard and joist, because with it touching or having it too close under more substantial impact noise issues will short circuit the system. As a guide to the soundproofing values for airborne and impact, we would expect to see a 5-8dB improvement for airborne and 5-10dB for impact, which is 25-40% and 25-50% respectively. flanking paths down any untreated walls will affect performance.
With traditional overboard attached directly to the ceiling such as Acoustic Plasterboard or any other high-density acoustic boarding - the MuteClip® LP will offer minimal height loss with the suspension that is important for increased airborne and impact soundproofing. Noise issues will be reduced across common household noise levels such as those featured above, but as the sound is subjective others may have a certain level of hearing sensitivity that can be medical or through it being apparent for such a long time, that it’s become a trigger for stress issues.
As structures differ from building to building, and from room to room in a single dwelling or structure, the airborne and impact estimated values will be close to passing Part E Building Regulations. It is advised to seek an acoustic underlay on any flooring above to reduce any potential flanking down adjacent walls, especially where impact noise is concerned. With new builds, we can create estimates of acoustic results in a partition design to help with the specification.
With our MuteClip® LP, there is a little more to its installation to make sure that the ceiling is level so that contact is not made between the joist and Acoustic Plasterboard. There is a little more to fix than the standard MuteClip® - but it still has no incorrect way of fitting it that it cannot be over tightened nor crushed, two characteristic fixings errors made during the installation of Resilient Channel. Another significant point is that Resilient Channel cannot be installed to save room height; there is only one way to fix them.
Leaving an isolation gap is very important to where you wish to break contact with adjacent surfaces that could flank noise such as tightly abutting the Acoustic Plasterboard layer to the adjacent walls. If any vibration is detected in these nearby areas it will transfer back into the plasterboard - short-circuiting the MuteClip® and Channel. Again, tightly abutting will also reduce the ceiling’s suspension in reaction to structural borne vibration and low-frequency sound energy - negatively impacting the systems acoustic performance.
Depending on the thickness of your joists, this will determine the amount of Acoustic Mineral Wool to use in the given cavity. Since MuteClip® LP has a low profile, we do not have the same isolation gap as when they are fixed on the bottom of joist, and we will need to reduce the amount of space given. Typical joist depths found in the majority of residences are of 2x8 inches or 50.8 x 203.2, so perhaps only 150mm total thickness of Acoustic Mineral Wool would be appropriate. We recommend leaving an air gap of at least 10mm from the MuteClip® Channel and the floor above, tightly compacting in additional sound insulation will harm acoustic performance.
All decorative features such as coving and cornicing need removing, as well as any existing plasterboard and lath and plaster for the MuteClip® LP, requires fitting on the side of the joist. Electronics such as light fixtures, alarms or motion sensors, for example, would need wiring extended to accommodate the new depths and moved, this work would be carried out by a registered electrician.