Concrete Ceiling

Housing, office and industrial structures are being rapidly built from concrete, more so than timber in urban centres, where the concentration of noise pollution is much greater. Concrete offers greater control with pre-cast options, these are factory-built slabs and can be built with a greater speed than timber. Concrete also allows taller structures to be built with less square meterage on the ground. But although these are made of concrete, they still require soundproofing on ceilings to protect one another from impact and airborne noise. We now find multi-purpose complexes that give us restaurants, gymnasiums and bars right underneath residential builds. These prompt both Part E Building Regulations and in some cases, very strict Building Control requirements.


To help you understand what performance means, electing the right soundproofing for gathering information for a soundproofing project, and guidance on acoustic design, selecting 'view more' below will expand this for you. These systems will offer options for those looking at three deciding categories: Performance, Cost and Thickness. 


                             Acoustic Testing or Sound Testing

Acoustic Design         Installation             Sound Test


Concrete offers 'stiffness' and 'mass' which offer both negative and positives at the same time. the 'stiffness' here makes it a problem for impact noise when there is no decoupling or separation from the structure. Our MuteClip® offers an effective method of decoupling with a strong focus on minimising the space lost, helping to protect against impact noise. The 'mass' here helps to protect against airborne noise, the benefit of concrete. But, if the noise is of low frequency in nature or not quite enough for the property we then again seek isolation through decoupling. MuteClip® again is our best option for relieving a wide range of common noise issues found in homes and workplaces.


Concrete structures are often constructed of the following.

  • Pre-Cast Concrete
  • Poured Concrete
  • Block and Beam Concrete


Understanding Performance in System Summary

Our system summaries are based on guided figures of the highest demonstrable number for this has what has been achieved. If you are an architect, acoustic consultant or specifier you will find all of our test data relevant to that system under 'System Performance' and complete test data under 'Related PDFs' for comparing different scenarios.


If you are a homeowner looking to improve the soundproofing or your home, we have given subjective readings in our 'System Performance' too, and we are always looking at how to best represent the effectiveness of our systems so that you feel comfortable in your decision. Talking to our wonderful team and their wealth of experience will help you to clear up any uncertainties you have.


Contact us | 01937 588 226


Airborne Performance Reading | We have included an 'Up to *dB' rating supported by taking our test data and applying the correction, we have outlined these in details in our 'Guide to Understanding Acoustic Test Results'. But, if you are comparing systems, with a (-*number) you need to subtract this from the first number as like our example below.


DnT,w (C;Ctr) =61 (-1;-7) dB | = 54dB


Impact Performance Readings | In our impact performance, we have two results depending on how we have tested them, and have tried to keep this as clear as possible. 'Down to *dB' is when you are measuring the amount of impact noise transferred. You are looking for a lower number here.


L’nT,w = 53dB = (Down to 53dB)


The other is the reduction figure that takes before and after, this is more relevant with concrete floors. We put (reduction) next to 'Up to *dB' this to indicate this. You are looking for a higher number here.


Δ 30dB (reduction) = 'Up to 30dB (reduction)

Additional guidance for understanding system and performance. 

  • Systems are important to understand as a whole because they give the clearest picture. 'Soundproofing Products' are assembled and tested in a system, and this includes the partition, the ceiling in this case, with all its parts. Even the most robust systems mat will almost never provide you with an additional "45 dB reduction" for airborne noise, and will almost certainly include the ceiling and floor as a whole. 
  • If the number signifying impact results go beyond 40dB, especially for a simple soundproof mat product, you could assume this is an L'nT,w or Ln,w rating, where you look for a lower number. Below this number they could be talking about the reduction, a Δ symbol is usually shown here, a higher number is desired here.


Understanding Costs in Systems

Since the costs can vary, we have based this on a £-£££££ rating. We are basing this on the material costs alone, the additional fixtures and fixings not included in this. We do provide installation and cover nationwide - we'd be more than happy to go through the details of this with you by contacting our team!


Understanding Thickness in Systems

We take our complete material depths here as they are applied directly to the concrete soffit. Skim and plastering is not included but will be nominal in the overall system depth.


Acoustic Design and Flanking Noise

We provide Acoustic Design at varying levels, and you can read more about how we provide this to all of our customers, whether you are a newcomer soundproofing their home, or an architect or specifier. A basic level of Acoustic Design is included in all of our projects, this is because every property will offer its uniqueness in passing sound, there is no definitive answer to any project. We know that makes it difficult, but we will help you get to the point of using the best system for soundproofing your concrete ceiling while making sure focus is given to the smaller details. We will investigate with you!


If you are working on new build structures as an architect, acoustic consultant or a specifier, we are able to provide 'Partition Designs' that combine ceiling and floor (when necessary) systems to showcase potential acoustic performance values. We are able to look at the projected airborne and impact down to the different structural concrete slabs alongside the inclusion of our differing ceiling soundproofing systems to find the right one for your project. We are also able to do this with existing builds when we have the previous structure design with the relevant information.


Acoustic Design requires a blend of the creative, scientific and practical approaches to solving the huge majority of issues found in soundproofing. An understanding of everything from neighbour noise to workplace disturbances with how it affects every individual differently cannot be responded by simply adhering to regulations, they must be acknowledged together, whether that is with you, an individual or the workplace as a whole.


Flanking transmission or flanking noise is where sound takes an alternative path, which varies from room to room, and structure to structure. When open cavities great or small or adjacent to the area you are covering, for example, any wall partitions that are adjacent to the ceiling will become the next area of weakness. We can help advise on this and the answer can range from installing Acoustic Mineral Wool between the studs to using varying wall and ceiling soundproofing systems to get it under control.



View More


MuteClip® MF Ceiling

An MF ceiling partition to be used with existing frameworks to acoustically isolate and de-couple systems and materials. Providing excellent reductions in both airborne and impact sound in order to pass Part-E of Building Regulations.

  • Airborne: 58dB (DnT,w + Ctr) *
  • Impact: 48dB (L'nT,w) *
  • 12mm
More about MuteClip® MF Ceiling

MuteClip® Stud Double | Concrete Ceiling Soundproofing

For those addressing problems with impact and airborne noise, look no further than this system. Providing a solution from the home the workplace to recording studios with our versatile MuteClip®

  • Airborne: 65dB*
  • Impact: 40dB*
  • 74mm (excluding stud frame)
More about MuteClip® Stud Double | Concrete Ceiling Soundproofing

MuteClip® Stud Single | Concrete Ceiling Soundproofing

A slim and effective solution to gain high levels of protection against impact noise, as well as airborne noise. Used where impact noises are the biggest issue around footsteps and general vibration

  • Airborne: 60dB*
  • Impact: 42dB*
  • 55mm (excluding stud frame)
More about MuteClip® Stud Single | Concrete Ceiling Soundproofing

MuteClip® Double | Concrete Ceiling Soundproofing

Directly fitted to the concrete slab, this system provides a high performance against airborne and impact noise. Perfect for soundproofing the home where the loss of room height is a concern.

  • Airborne: 61dB*
  • Impact: 43dB*
  • 74mm
More about MuteClip® Double | Concrete Ceiling Soundproofing