Isolation Strip P8
£7.97
-
- Performance: Expected 4-8dB* improvement in joist floor systems.
- Dimensions: 2m x 46mm x 4-8mm.
- Weight: 500g
- For: homes, workplaces, industrial developments, and specialist audio environments.
- Compliance: Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*
- Installation: Please see our installation tab below.
- Where: multi-use application on walls, floors and ceilings, with a special focus on decoupling the structure to improve acoustic performance.
Isolation Strip P8
Isolation Strip P8 is a strip of self-adhesive pimpled rubber used for reducing impact sounds travelling from the floor to rooms below. The P8 isolation strip is applied to the floor joists.
The pimpled P8 isolation strip has varying heights between 4-8mm which makes it a little more compressible, helps to reduce points of contact and spreads the load when a force from footsteps or pressure from furniture over a particular area is applied. This results in an enhanced treatment of impact transmission over flat isolation strips. Isolation Strip P8 will not falter under typical weights that are common in households and commercial properties
Self Adhesive
Our Carpet Gripper Strips are backed with a self-adhesive coating. This makes the installation process simple and fast. Just carefully peel off the protective paper and apply it to dust and oil-free wooden uprights.
Highly recycled content
You can feel good about your purchase knowing our acoustic strips are made from 92% recycled rubber.
For use in a soundproofing system
Our carpet gripper strips are used to correct the height under carpet gripper rods.
Find out more information about Isolation Strip P8 by downloading the guides below.
If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.
Technical Support
Should you require further technical assistance in specifying our products, please contact us.
BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here.
Additional information
| Weight | 1.66 kg |
|---|---|
| Dimensions | 2000 × 46 × 4-8 mm |
| Size | 50mm, 100mm |
You must be logged in to post a review.
Related products
-
-
Isolation Strip F5
From: £14.97Select options This product has multiple variants. The options may be chosen on the product page -
-
Reviews
There are no reviews yet.