Perimeter Flanking Band FB8 (50m)

Shipped by iKoustic from the UK

£34.95

£41.94 inc. VAT

Delivery and Returns Policy

  • For use with acoustic underlays to prevent flanking noise.
  • Installed invisibly around the perimeter of the room.
  • Dimensions: 50m x 8mm x 150mmย 
  • Weight: 1kg
  • For:ย homes, workplaces, industrial developments, and specialist audio environments.
  • Compliance:ย Compliant with bothย Part E Building Regulationsย (England, Wales, Northern Ireland and the Republic of Ireland).*
  • Installation: Requires an adhesive.
  • Where:ย for use with the installation of rigid flooring to create a buffer,ย special focus on decoupling the floor to ensure best acoustic performance.

When installation our MuteMatยฎ flooring systems, it is essential to line the perimeter of each room when installing a new subfloor, or installing any hard floor finishes.

Perimeter Flanking Band FB8

Perimeter Flanking Band – FB8 is an absolute essential in floor soundproofing systems and one that is often overlooked. Perimeter Flanking Bands are to line the perimeter of any room that is using rigid materials that would come into contact with the walls. It acts as a buffer, one that reduces Flanking Transmission, by creating a barrier between floor and wall. It is to be installed along with any installation of a new subfloor in timber builds, even if you plan to install a woven carpet. It is for when you are installing any hard floor finish such as the examples below.

  • Engineered wood
  • Laminate
  • Luxury vinyl tile
  • Vinyl
  • Ceramics
     

Screeding also benefits from the use of a Flanking Band as it helps to decouple the new floating screed from being in immediate contact with the walls.

flanking band 2 01
Area Perimeter Calculator
Single Product Calculator – Flanking Band

Perimeter Flanking Band should be applied around the perimeter of each room to where hard flooring comes in to contact with the adjacent wall, so with the fitting of new timber flooring it should be installed at joist level to the final floor finish level. When using acoustic under screeding in concrete constructions, you will want to make sure full coverage is available to reduce contact with the adjacent concrete walls.

When all floor layers are butt against the Perimeter Flanking Band it reduces flanking transmission by creating a barrier between floor and wall to deaden the impact vibrations passing, instead of passing directly into the adjacent walls – helping to improve the soundproofing quality of the floor. Negating this can lead to failure of acoustic tests in most cases and is difficult and costly to fix in retrospect.

Find out more information about Perimeter Flanking Band FB8 by downloading the guides below.

Product Data Sheet

If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.

Technical Support
Should you require further technical assistance in specifying our products, please contact us.

BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here.ย 

Important Information

Our products contain a high level of mass. If there are any structural concerns you will want to consult a Structural Engineer to discuss your requirements.

*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our ‘Featured Systems’ tab.

Delivery information.

If you place an order online it’s likely we will call to discuss delivery to make sure it runs as smoothly as possible. Deliveries can arrive on a large vehicle. If there are access issues or HGV restrictions, please do let us know in advance as our website options are given in good faith of no restrictions. All of our deliveries must be signed for so you will need to ensure someone is on the premises on the day of delivery.

Delivery Times