MuteMat® OSF 750-10

We are always looking for the best ways to describe to you the world of soundproofing through introducing guides that range from the basic principles of sound, how to best soundproof surfaces and what to look for, and how to understand acoustic test data, and this is only naming a few! We want to help you come to the right decision, so whether this is through the use of our guides or talking to a member of our team - we are here to help!

How to soundproof a floor

A combination of the following will always result in a much improved acoustic performance.

• Mass: the addition of more substantial materials to reduce sound energy, for example, added layers combined with soundproof plasterboard.
• Separation: breaking contact with the surface or surfaces through the use of acoustic isolation clips, or stud framing.
• Damping: the reduction of vibration through the use of flexible, damping materials such as Tecsound.
  
   

MuteMat® OSF 750-10 is an over screed solution for the reduction of impact noise. It is its damping of 'footsteps' and others concerning structural-borne vibration that MuteMat® OSF provides. It provides consistent results on concrete, making it ideal for when great quantities need applying over vast areas. Because it has a set amount of compressibility, depending on its load, it will pass Part E Building Regulations for most general use concrete builds. Mass is most often found in the concrete itself and is not likely needed at floor level. For those looking to surpass requirements, we would suggest combining MuteMat® OSF 750-10 with our MuteClip® Systems for ceilings. You want to prevent Flanking Transmission whenever possible, both in timber and concrete builds, and one example here that installation teams often overlook is by installing all the flooring layers tightly against the adjacent walls without a buffer. This vibration then has a clear path for transfer into the wall, moving up or down, leading to inferior results, or even the failure of an acoustic test.

If you are troubled by an extensive range of noises, ones that are intrusive and disruptive, or if you are specifying for a project that wants to be 'future-proofed', you will need to source solutions that combine all of the properties above. Low-frequency content can be found not just with machinery or with amplified music but you will also find these in the human voice,  television sets, with the increasing use of soundbars, and from the impact of closing doors. It is these sounds that require separation from the structure.

We recognise the subjective nature of sound and how we react to each one, and that is why we offer so many variances in our systems. We understand that it is not always possible to incorporate significant losses of space with say, the introduction of a stud frame, so we provide different variances to suit what performance you need, your budget and thickness.

Learn more about what you need, and how to approach soundproofing floors below.

Ready to see how MuteMat® OSF 750-10 benefits your project? Select our 'Systems' tab and then on any system to learn more about each one. You will discover their acoustic performances, overall system thickness and in what scenarios they are best used. You can then add all featured components to the cart in a press of a button!

Whatever your soundproofing project, come and speak to our team on 01937 588 226.