MuteClip MF – Part E Ceiling Soundproofing

Shipped by iKoustic from the UK


£4.74 inc. VAT


Delivery and Returns Policy

We stand for quality, and we are proud of it.

An MF ceiling partition to be used with existing frameworks to acoustically isolate and de-couple systems and materials. Providing excellent reductions in both airborne and impact sound in order to pass Part-E of Building Regulations.

The iKoustic MF ceiling system utilizes the MuteClip MP acoustic hangar, which allows for excellent acoustic de-coupling of dropped ceilings. When used with the system provides a good reduction in both impact and airborne sound transmission.

The MuteClip MP is designed to de-couple ceiling systems from the structure of the building. These brackets can be used in place of the standard metal soffit cleat. The MuteClip MP separates the lower rigid materials from the building structure. These are attached through and into the soffit using a suitable concrete fixing. The MF ceiling can then be installed below, the support angles attaching to the MuteClip MP bracket. Within the ceiling system 50mm of 60kg/m³ acoustic wool should be installed across the channels covering the entire area of the ceiling. Finally, two layers of acoustic plasterboard with the joins staggered are installed to the underside of the channels, finished around the perimeter with acoustic sealant. The performance of the system can be further upgraded by installing Tecsound between the two plasterboards to help further de-couple rigid layers and help reduce vibration.


A soundproofing system isn’t rocket science but sometimes figuring out which one is right for you can be challenging. Check out our FAQs, get in touch via our live chat, or give us a call to speak to a human.


If you need product data or installation guides for this system you’ll always find them here.

If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.

Technical Support
Should you require further technical assistance in specifying our products, please contact us and ask for our Technical Rep, Gabriel Whittle.

BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here. 

Important Information

Our products contain a high level of mass. If there are any structural concerns you will want to consult a Structural Engineer to discuss your requirements.

*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our ‘Featured Systems’ tab.

Delivery information.

If you place an order online it’s likely we will call to discuss delivery to make sure it runs as smoothly as possible. Deliveries can arrive on a large vehicle. If there are access issues or HGV restrictions, please do let us know in advance as our website options are given in good faith of no restrictions. All of our deliveries must be signed for so you will need to ensure someone is on the premises on the day of delivery.

Delivery Times